Initial Data

1. GENERAL DATA

1. Shaft Model Data
2. Shaft materials list
3. Distributed Loads and Extra data
4. Concentrated Loads
5. General Bearing Data
6. Coupling angular Compliances
7. Stress Check Points
8. Engine Data
9. Thrust shaft load diagram
10. Target Positions

2. OPERATING CONDITIONS
1. Condition No 1 (Cargo)
   1. Operation bearing Data
   2. Distributed Loads
   3. Concentrated Loads
   4. Hydrodynamic Loads
   
   

Results

1. SHAFTLINE PARAMETERS IN OPERATION
1. Initial bearing Offsets in reference to the stern tube axis
2. Shaftline principal parameters in operation
3. Displacement influence Numbers, kN/mm
4. Load alteration influence Numbers, kN/kN

2. PROPELLER SHAFT
1. Initial bearing Offsets in reference to the stern tube axis
2. Bearing Loads

3. SHAFTLINE DECOUPLED FROM PRIME MOVER
1. Initial bearing Offsets in reference to the stern tube axis
2. Bearing Loads
3. Stress at the stress check points
4. Displacement influence Numbers, kN/mm
5. Load alteration influence Numbers, kN/kN
6. Sag and Gap at the prime mover flange

4. FULLY ASSEMBLED SHAFTLINE
1. Initial bearing Offsets in reference to the stern tube axis
2. Bearing Loads
3. Load onto prime mover shaft flange
4. Stress at the stress check points
5. Bearing adjustments stress influence Numbers, MPa/mm

5. SAG & GAP AT THE OPEN SHAFT FLANGE CONNECTIONS
1. Initial bearing Offsets in reference to the stern tube axis
2. Bearing Loads
3. SAG & GAP at the open flange connections

A P P E N D I X